PCBN / PCD

Details
    • Ssangyong PCBN is an ultra hard cutting tool consisting of polycrystalline cubic boron nitride with metallic or ceramic binder.
    • It is available as both tip brazed and solid CBN.

Products Details

  • Ssangyong PCD is an ultra hard cutting tool consisting of polycrystalline diamond which is tip brazed to a carbide insert according to the various applications.
  • PCBN is for hardened ferrous material and PCD is for non-ferrous material, wood, aluminum and copper alloys at extremely high speed
  • Extremely hard and wear-resistant
  • Dry or wet machining depending on the cutting condition

PCBN SBN1000 Ultra high hardness
Its hardness is up to 3.900 Hv
Content of CBN : 95%
Ultra cutting speed for cast iron from roughing to finishing
Machining chilled cast irons and high chrome alloy steel
Harder

Tougher

Harder
SBN2000 Machining for continuous cut of hardened steel
Its hardness is up to 2.700 Hv
Content of CBN : 50%
Precision finishing of hardened steel
Recommended to use for hard materials
Bearing steel, forged steel and high speed steel
SBN3000:NEW: Best combination of wear resistance and toughness
Its hardness is up to 2.700 Hv
Content of CBN : 60%
Light interrupted cut of hardened steel
General purpose of turning and milling for hardened steel
SBN4000:NEW: Good resistance to crater and flank wear
Its hardness is up to 2.900 Hv
Content of CBN : 65%
Heavy interrupted cut of hardened steel
SBN5000:NEW: Extreme wear resistance
Solid CBN
Content of CBN : 93%
Rough machining of cast iron powder metal alloy
PCD SPD1000 Machining with fine surface finish
Particle Size : 4 ~ 5 m
Machining of aluminum and wood
Gives fine surface finish in turning operation
SPD2000 Ultra high hardness
Great wear resistance
Particle Size : 8 ~ 9 m
The first choice of PCD grades
Turning operation of aluminum and copper alloy
Machining aluminum alloy with lower percentage of Si
SPD3000 Machining with interruption
Particle Size : 15 ~ 22 m
Milling operation of aluminum alloy
Machining ultra fine alloy and powder sintered metal cutting of composites